19W LED Driver & Microwave Sensor Constant Current 0.3A/0.35A Ceiling Light 14M(D)x6M(H)
HT19V 2 is a LED Driver&Microwave Sensor 2-in-1 Products with 30-54V Output Voltage Detection Range & Height of 6m(H) x 14m(D), Dimming Function Microwave Motion Detector with 12-19W Output Power Suitable for Ceiling Light
Features:
1. 3 years warranty, IP20
2. Abnormal protection SCP: Auto recovery, OVP, OCP, OTP
3. Tri-level control by 1-10V output
4. Dusk & Dawn Microwave Motion Sensor
5. Dimming Function with 10%/20%/30%/50% Stand-by Brightness
6. Constant Current with options of 0.3A/0.35A
7. Detection Range x Height of 14M x 6M
8. Output Power 19W max. with Voltage of 30 -54V
9. Efficiency of 87%
10. Empty Load voltage of 63V max.
11. EMC standardEN55015
Product Description
Input voltage | 220~240VAC 50/60Hz |
Input current | 0.1 Max |
Input power | 22W Max |
Detection area | 50%/100% |
Hold time | 5s/60s/ 5min/10min |
Daylight threshold | 2Lux /10Lux /50Lux/Disable |
Stand-by period | 0s/10s/10min /+∞ |
Stand-by dimming level | 10%/30% |
Microwave frequency | 5.8GHz±75MHz |
Microwave power | <0.3mW |
Detection angle | 30°-150° |
Mounting height | Max.6m |
Detection range | Max.ø14m |
Output LED current | 0.3A/0.35A±5% |
Output LED voltage | 30-54V |
Output LED power | 12-19W Max. |
Empty load voltage | ≤63V |
Power factor | >0.9 |
Efficiency | 87% (Max.) |
Operating temperature | Ta: -20°C+50°C Tc: 80°C |
Abnormal protection | SCP:Auto recovery,OVP,OCP,OTP |
EMC standard | EN55015 |
Safety standard | EN61347-1 EN61347-2-13 EN60598-1 |
IP rating | IP20 |
Life time | 30,000 hours |
Warranty | 3 years |
Detection Range
This figure indicates the maximum distance at the highest mounting height with 100% sensitivity.
Typical installation height 2.5-6m.
Mechanical structure
With eight DIP switch poles to set all parameters
With two DIP switch poles to choose different output current
With two installation hole, easily fixed to the lighting fixture for end user.
Wiring diagram
Two poles to connect with power supply (220-240VAC)
Two poles to connect with LED Light
Dimensions (mm)
DIP Switch Setting
Detection area Hold-time Daylight threshold Stand-by period Stand-by dimming level
In this area, The period of Definition of the The period of light The definition of movement will light keeping ambient brightness; keeping low output low output in the be detected 100% brightness only when the before it's standby period.
and able to after moving ambient brightness completely trigger the objects leave the is lower than the switched off. When sensor. 100% detection area. preset specific lux it's preset as∞“,detection
[1mDriver LED da 19W e sensore a microonde Corrente costante 0,3A/0,35A Plafoniera 14M(D)x6M(H)
HT19V 2 è un driver LED e sensore a microonde Prodotti 2 in 1 con campo di rilevamento della tensione di uscita 30-54 V e altezza di 6 m (H) x 14 m (D), funzione di regolazione della luminosità Rilevatore di movimento a microonde con potenza di uscita 12-19 W Adatto per plafoniere
Caratteristiche:
D3 anni di garanzia, IP20
Protezione anomala SCP: ripristino automatico, OVP, OCP, OTP
Controllo a tre livelli tramite uscita 1-10V
4. Sensore di movimento a microonde Dusk & Dawn
5. Funzione di regolazione della luminosità con luminosità in standby del 10%/20%/30%/50%
6. Corrente costante con opzioni di 0,3 A/0,35 A
7. Campo di rilevamento x altezza di 14 M x 6 M
8. Potenza in uscita 19 W max. con tensione di 30
-54V
9. Efficienza dell'87%
10. Tensione di carico a vuoto di 63V max.
11. Norma EMCEN55015
Descrizione del prodotto
Tensione di ingresso
220~240VAC 50/60Hz
Corrente di ingresso
0,1 max
Potenza di ingresso
22 W max
Area di rilevamento
50%/100%
Tenere il tempo
5s/60s/ 5min/10min
Soglia diurna
2Lux/10Lux/50Lux/Disabilita
Periodo di attesa
0s/10s/10min /+∞
Livello di attenuazione in standby
10%/30%
Frequenza microonde
5,8 GHz ± 75 MHz
Potenza microonde
<0,3 mW