| SPECIFICAION | |||||
| MODEL | SMT-012-080VW | SMT-024-080VW | |||
| OUTPUT | DC VOLTAGE | 12V | 24V | ||
| RATED CURRENT | 6.66A | 3.33A | |||
| CURRENT RANGE | 0~6.66A | 0~3.33A | |||
| RATED POWER | 80W | 80W | |||
| RIPPLE&NOISE(max) | 1.2V | 1.2V | |||
| voltage TOLERANCE | 12V±5% | 24V±5% | |||
| SETUP RISE TIME | 80ms/110,220VAC | 80ms/110,220VAC | |||
| HOLD UP TIME(Typ.) | 60ms/110,220VAC | 60ms/110,220VAC | |||
| INPUT | VOLTAGE RANGE | 100~265Vac | 100~265Vac | ||
| FREQUENCY RANGE | 50~60Hz | 50~60Hz | |||
| POWER FACTOR(Typ.) | |||||
| EFFICIENCY(Typ.) | ﹥82% | ﹥83% | |||
| AC CURRENT(Typ.) | 0.5A/110V,220VAC | 0.4A/110V,220VAC | |||
| INRUSH CURRENT (Typ.) | COLD START 30A/110,220VAC | ||||
| PROTECTION | Short circuit | Protection type:recovers automatically after condition is removed | |||
| Overload | overload protected@145-160% above peak rating | ||||
| Over temperature | Protection type:Shut down o/p voltage,re-power on to removed | ||||
| ENVIRONMENT | WORKING TEMP. | -30~+50℃ (Refer to output load derating curve) | |||
| WORKING HUMIDITY | 20~99% RH non-condensing(Waterproof) | ||||
| STORAGE TEMP.,HUMIDITY | -40~+80℃,10~99%RH | ||||
| SAFETY&EMC | SAFETY STANDARDS | UL, CE Mark(LVD, EMC), IP67 | |||
| WITHSTAND VOLTAGE | I/P-O/P:1.5KVAC IP-GND:1.5KVAC | ||||
| EMC Test Standards | EN55015:2006;EN61547:1995+2000;EN61000-3-2:2006 | ||||
| EN61000-3-3:1995+A2:2005;EN61346-1:2001;EN61347-2-13:2006 | |||||
| NOTE | 1.All parameters NOT specially mentoned are measured at 110VAC, 220VAC input,rated load and 25℃ of ambient temperature. | ||||
| 2.Ripple&noise are measured at 20MHz of bandwidth by using a 12 | |||||
| [1mNome del prodotto: da CA a CC | |||||
 |  |  |  |  |  |
Alimentatore LED 80W a tensione costante
POTENZA NOMINALE
80 ms/110.220 V CA
60 ms/110.220 V CA
60 ms/110.220 V CA
100~265Vac
100~265Vac
0,4 A/110 V, 220 V CA
CORRENTE DI SBLOCCO (tip.)
AVVIAMENTO A FREDDO 30A/110.220VAC
Subscribe to our weekly newsletter and receive exclusive offers on products you love!
X
Gold Supplier
