ETL 12V 72w universal led driver suppliers
SMT-012-072VW is IP67 led driver 72w in 12vdc, output 6amp current, standard AC and DC output cord 18AWG UL listed JTSW standard, work with DELIGHT LED RBG lights 12v.
Specification
MODEL | SMT-012-072VW | SMT-024-072VW | |
OUTPUT | DC VOLTAGE | 12V | 24V |
RATED CURRENT | 6.0A | 3.0A | |
CURRENT RANGE | 0~6.0A | 0~3.0A | |
RATED POWER | 72W | 72W | |
RIPPLE&NOISE(max) | 1.2V | 1.2V | |
voltage TOLERANCE | 12V±5% | 24V±5% | |
SETUP RISE TIME | 80ms/110,220VAC | 80ms/110,220VAC | |
HOLD UP TIME(Typ.) | 60ms/110,220VAC | 60ms/110,220VAC | |
INPUT | VOLTAGE RANGE | 90~135/170~265Vac | 90~135/170~265Vac |
FREQUENCY RANGE | 50~60Hz | 50~60Hz | |
POWER FACTOR(Typ.) | |||
EFFICIENCY(Typ.) | ﹥84% | ﹥84% | |
AC CURRENT(Typ.) | 0.5A/110V,220VAC | 0.5A/110V,220VAC | |
INRUSH CURRENT (Typ.) | COLD START 30A/110,220VAC | ||
PROTECTION | Short circuit | Protection type:recovers automatically after condition is removed | |
Overload | overload protected@145-160% above peak rating | ||
Over temperature | Protection type:Shut down o/p voltage,re-power on to removed | ||
ENVIRONMENT | WORKING TEMP. | -30~+50℃ (Refer to output load derating curve) | |
WORKING HUMIDITY | 20~99% RH non-condensing(Waterproof) | ||
STORAGE TEMP.,HUMIDITY | -40~+80℃,10~99%RH | ||
SAFETY&EMC | SAFETY STANDARDS | UL, CE Mark(LVD, EMC), IP67 | |
WITHSTAND VOLTAGE | I/P-O/P:1.5KVAC IP-GND:1.5KVAC | ||
EMC Test Standards | EN55015:2006;EN61547:1995+2000;EN61000-3-2:2006 | ||
EN61000-3-3:1995+A2:2005;EN61346-1:2001;EN61347-2-13:2006 | |||
NOTE | 1.All parameters NOT specially mentoned are measured at 110VAC, 220VAC input,rated load and 25℃ of ambient temperature. | ||
2.Ripple&noise are measured at 20MHz of bandwidth by using a 12 | |||
[1mFornitori di driver per led universali ETL 12V 72w
SMT-012-072VW è IP67alimentatore led 72win 12vdc, uscita 6amp di corrente, cavo di uscita CA e CC standard 18AWG standard JTSW elencato UL, funziona con luci LED RBG DELIGHT 12v.Specifica.
MODELLO
SMT-012-072VWSMT-024-072VWPRODUZIONE TENSIONE CC 12V 24V CORRENTE NOMINALE 6.0A